Model 611

RapidSlat® Model 611

This advanced service door is well suited for any application that requires a rolling steel door with the added benefits of high cycles, increased productivity and durability including banks, manufacturing facilities, and parking garages. It is ideal for customers in the parking garage market wanting to replace grilles. The fenestrated slats allow air circulation; they are more durable than grilles and more secure than fabric doors.​

Features

Standard max width

up to 20′ (6096 mm) depending on gauge and slat type

Standard max height

up to 20′ (6096 mm) depending on gauge and slat type

Mounting

Interior or exterior face of wall

Control panel

Variable frequency drive controller with self-diagnostics (time delay self-close timer and non-resettable cycle counter included); LCD readout, enclosure NEMA 4X rated

Curtain

Interlocking roll-formed slats, end locks attached to prevent lateral movement; Curved profile type C-187 for doors up to 15’4″ wide; 22 gauge galvanized steel; Curved profile type C-275 for doors up to 20′ wide; 22 gauge galvanized steel; Flat profile type F-265 for doors up to 20′ wide; 22 gauge galvanized steel

Curtain finish

Gray, tan or white PowderGuard® Max powder coat with hardening additive

Bottom bar

Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with 2-wire, self-monitoring, fail safe, electric sensing edge

Hood

24 gauge galvanized steel primed, black painted

Brackets

Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel

Guides

Three structural steel angles PowderGuard® Premium powder coated black

Door roll

Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device

Safety devices

Built-in brake mechanism provides additional peace-of-mind against uncontrolled curtain travel.

Wireless monitored safety edge – all doors are equipped with a mandatory reversing or sensing edge to prevent entrapment.

Photoelectric safety sensors with guards – provide additional safety during door operation to help prevent injury and damage

Operation

Direct drive, integrated gear motor/brake assembly (up to 24” per sec up speed / 12” per sec down speed); drive assembly and limit sensors are factory pre-assembled; manual hand chain for power outage

Actuator

Single open/close/stop push button station incorporated into control panel

Wind load

20 psf when optional wear strips are not specified

Warranty

5 year limited warranty coverage on all mechanical door system components and control panel hardware. ​​​

Door Options

  • Curved Profile type C-187 for doors up to 15’4” wide also available in: 20, 18 ga. galvanized steel; 22, 20 ga. stainless steel; 18 ga. (.040”) aluminum
  • Curved Profile type C-275 for doors up to 20’ wide also available in: 20, 18 ga. galvanized steel; 22, 20 ga. stainless steel; 16 gauge (.050”) aluminum
  • Flat Profile type F-265 for doors up to 20’ wide also available in: 20, 18 ga. galvanized steel; 22, 20 ga. stainless steel; 16 gauge (.050”) aluminum
  • Bottom Bar also available in: galvanized steel, stainless steel, aluminum
  • Wear strips are an available option. (20PSF wind load rating is no longer available when wear strips are selected.)
  • Guide options include galvanized steel and powdercoated steel
  • Hood also available in: powdercoat, stainless steel and aluminum
  • Brackets also available in: powdercoat, and galvanized steel
  • Direct drive motors available in 1 HP, 2 HP, 3 HP, and 220 VAC 1-phase and 208/230/460/575 VAC 3-phase
  • Dual photoelectric sensors available for safety
  • Optional push buttons, loop detectors, radio control, motion detectors or any combination thereof available for door operation/control
  • PowderGuard® Max powder coat finish options are available in approximately 200 colors as well as custom matching to specification. On the RapidSlat® models PowderGuard® Max is required on curtain to maintain warranty on finish
  • PowderGuard® Textured powdercoat: Industrial textured powdercoat provides a thicker, more scratch resistant coat for added product protection available on brackets, guides and bottom bar
  • Fenestrated 18 ga. steel slats or vision lites with uniformly spaced openings of 3″ x 5/8″ (76 mm x 16 mm) either slat profile or 10” x 1” (254 mm x 25.4 mm) flat slat profile only
  • Perforated 18 ga. steel slats with 1/16″ diameter perforation; spaced 3/32” on center ​​​
  • High wind load options available

Colors

Standard Color: PowderGuard® Max


  • White

  • Gray

  • Tan

Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door Distributor.

Powder Coat Color Options

PowderGuard® Max powder coat options are available in approximately 200 colors as well as custom matching to specification. On the RapidSlat® PowderGuard® Max is required to maintain warranty on finish.

PowderGuard® Max formula is four times harder than our PowderGuard® Premium, providing ehanced strength and durability to the finish and performs well in high cycle applications. Finish also provides easy to clean surface. Available in white, tan, and gray or select a color from approximately 200 RAL powder coat colors.

Reviews

There are no reviews yet.

Be the first to review “Model 611”

Your email address will not be published. Required fields are marked *